Char-Broil Patio Caddie Specifications download pdf (Page 8)

Items to Assemble

1 Grill Bottom

1 Control Panel Leg

1 Ignitor w/ Nut

2 #10-24x1” Machine Screws

2 #10-24 Lock Nuts

2 T-Nuts

2 #10x3/8" Self-Tap Screws

Before Beginning Assembly

• Remove all contents from box. Lay cardboard on the ground when unpacking, assemble grill parts on the cardboard to avoid

scratching surfaces.

• Carefully read and follow all assembly instructions, paying particular attention to parts orientation.

• Easily find fasteners by referring to each item (shown actual size) at the start of each step.

• Minimum tools...for assembly of your grill include screwdrivers (Phillips), adjustable wrench and pliers. A 3/8” nut driver would be

ideal.

• You may fill your LP gas tank prior to assembly. The tank must also have the safety cap installed onto the tank when not in use, See

Use & Care section.

A Unfold leg. Fasten leg using (2) #10x3/8” self-tap screws.

B Attach leg to grill bottom with (2) #10-24x1” machine screws and (2) #10-24 lock nuts.

Finger tighten only. Secure leg to grill bottom with t-nuts.

Note: Be sure that hole in grill bottom for electrode is pointing upward toward control

panel.

C Push ignitor into control leg and secure with ignitor nut.

Hole for electrode facing

toward control panel leg.

Grill Bottom

Ignitor

Control Panel Leg

Machine Screws

Qty: 2

#10-24x1”

#10-24

Lock Nuts

Qty: 2

T-Nuts

Qty: 2

8 • 06601322

Self-tap

screw

#10-24x1”

Screw

#10-24 Nut

T-Nut

Ignitor

Nut

#10x3/8"

Self-tap Screw

Qty: 2

1 2 3 4 5 6 7 8 9 ... 20

Comments to this Manuals

No comments

Char-Broil Patio Caddie Specifications Page 8

Comments to this Manuals

Related products and manuals for Barbecues & grills Char-Broil Patio Caddie