Char-Broil 463720109 User's Guide Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 32
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
cAuTioN
f
SPIDER ALERT!
GAS COLLECTOR
BOX & IGNITOR
CONTROL PANEI _ BURNER
SPIDERWEBS
INSIDEVENTURI
VALVE AIR VENTURI
SHUTTER
Ifyou notice thatyour grill is getting hard to light or that the
flame isn't as strong as it should be, take the time to check and
clean the venturis.
Insomeareasof thecountry,spidersorsmallinsectshavebeen
knownto create"flashback"problems.Thespidersspinwebs,build
nestsandlay eggsin thegrill'sventuritube(s)obstructingthe flowof
gas to the burner.The backed-upgas can ignitein theventuribehind
the controlpanel.Thisis knownas a flashbackandit can damage
yourgrill andeven causeinjury.
To preventflashbacksandensuregoodperformancethe burnerand
venturiassemblyshouldberemovedfromthegrill andcleaned
beforeusewheneverthe grillhas beenidlefor anextendedperiod.
Cleaning the Burner Assembly
Follow these instructions to clean and/or replace parts of burner
assembly or if you have trouble igniting grill.
1. Turn gas off at control knobs and LP cylinder.
2. Remove cooking grate and heat tent.
3. Under grill remove grease cup, disconnect ignitor wire from
burner.
4. Insidegrill remove burner assembly (A), clean ceramic
portion of electrode with rubbing alcohol and a swab.
5. Clean outside of burner with soap and water. Lay burner
upside down on flat surface, insert garden hose to force
water through tubes. Make sure water comes out of all
burner holes. Open clogged holes with a thin wire. Shake
out excess water and examine holes. Due to normal wear
and corrosion some holes may become enlarged. Ifany
large cracks or holes are found replace burner.
6. Ifgrill is to be stored, coat burner lightly with cooking oil.
Wrap in protective cover to keep insects out.
7. If not storing grill after cleaning, replace burner into grill
bottom.
VERY IMPORTANT: Burner tubes must re-engage valve
openings. See illustration (A).
8. Reattach ignitor wire to electrode.
9. Reposition heat tent and cooking grate. Reattach clean
grease cup to grease clip.
10. Before cooking again on grill, perform a "Leak Test'and
"Burner Flame Check".
Correct burner-to-valve engagement
A
BurnerTube
Valve
B
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments