Char-broil 463210011 User Manual download pdf (Page 13)

1/4-20x1/2” screw

Attach side panels to bottom shelf using three

1/4-20x1/2” screws, 7mm lock washers, and

7mm flat washers per panel.

7mm lock washer

7mm flat washer

Place bottom shelf upside down. Insert Bent U Pin into the caster mounting plate to lock it in place, shown A.

Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Bent U Pin and repeat for remaining

casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.

After all 4 casters are secure remove the Bent U Pin and save for future maintenance.

Locking caster

Bottom shelf

Non-lock caster

Rear

Front

Left side panel

Magnet

(with a hole)

Make sure side panels

are pushed as far to the

rear of bottom shelf as

possible before fully

tightening screws.

Right side panel

ASSEMBLY

IMPORTANT: Panel with magnet must

be on left side of bottom shelf.

Front

Bent U pin

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

No comments

Char-broil 463210011 User Manual Page 13