Char-Broil 463263110 User Manual download pdf (Page 19)

Insert front brace under control panel and between cart side panels. Make sure door hinge pins are on the top side and

facing the front. Secure using two 1/4-20x1½” screws, 7mm lock washers, and 7mm flat washers on each side.

NOTE: MAKE SURE THAT THE FRONT BRACE IS MOUNTED IN THE MOST DOWNWARD POSITION WHEN

ASSEMBLED TO CART.

#8-32x3/8” screw

4mm

lock washer

Control knob

bezel

First, remove the two screws and lock washers factory attached to the sideburner valve bracket. Position sideburner

valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes

on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.

Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on

fascia.Attach using two #8-32x3/8” screws and 4mm lock washers. Press sideburner control knob onto valve stem.

Install bezel with “OFF” at top.

Sideburner

valve bracket

Sideburner

fascia

Valve stem

Screws and Washers

removed from valve bracket

Note: Use left and right

holes on fascia to

attach valve bracket

holes on fascia to

attach bezel

Note: Use upper and lower

1/4-20x1½”

7mm lock

washer

7mm flat

Front brace

washer

screw

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Char-Broil 463263110 User Manual Page 19