Assembly
Open lid and remove all parts packed inside the grill. Using 8 M6 x 10mm screws, 8 m6 lock washers and 8 M6 flat washers, install the legs
onto the firebox as shown.
NOTE: the leg with the large igniter mounting hole must be on the front, RH side.
1
Using 2 M6x15mm screws and 2 M6 flange nuts, attach the side handle and flame tamer support bracket to one side of the firebox.
Repeat for the opposite side of the firebox.
2
9
CAUTION
Some parts may contain sharp edges! Wear protective
gloves if necessary.
Leg with igniter mounting hole
Comments to this Manuals