5
6
Insert the ash catcher into the bottom bowl.
Screw M4 x 8 - 2 pieces
Nut M4 - 2 pieces
Align the holes in the air vent with holes in the ash catcher. Insert two M4 x 8 screws
through the air vent ash catcher and ash catcher . Tighten two M4 nuts onto the screws.
Be careful not to over tighten nuts to allow for proper vent operation.
7
Place the charcoal grid onto the lower rim
of the bowl. Place the cooking grid onto
the upper rim of the bowl. Place the lid
onto the bowl.
Page 10
Comments to this Manuals